The factory director fined me 100,000 yuan, but I scrapped his production line of 10 million yuan.

Chapter 2

6,811 words

The next morning, I timed it perfectly. With ten seconds left before official start time, I rushed through the factory gates.

The time clock displayed: 8:00:00 AM.

Perfect.

Changing into my work uniform, I walked into Assembly Line 3.

Usually, I'd arrive half an hour early.

That's because the A-7, the most valuable German-imported equipment in the entire factory, had a peculiar temperament. It needed to be preheated and have several core parameters finely tuned to ensure the first batch of products after startup reached optimal yield.

This was a habit passed down by my mentor, the former chief engineer, and a tacit understanding I had always maintained.

But today, I decided that tacit understanding could go to hell.

I walked to my workstation, took out my travel mug, and unhurriedly brewed a cup of tea.

Steam clouded my glasses.

David, the workshop manager, a man in his forties, frowned at my leisurely pace but said nothing.

He knew my habits and probably assumed I had already finished the debugging.

At 8:30 AM, the startup bell rang.

The massive production line, like a slumbering steel behemoth, began to slowly awaken.

Conveyor belts rolled, robotic arms swung, and everything looked as usual.

Until the first batch of products emerged from the A-7 equipment.

"Screech—"

An incredibly harsh metal grinding sound abruptly echoed throughout the workshop.

Immediately afterward, the A-7's alarm light began to flash wildly, a dazzling red.

"What's going on?!"

David was the first to rush over. He picked up a freshly produced item and his face instantly turned ugly.

"They're all defective! Scratches on the surface! This whole batch is ruined!"

Everyone’s gaze, in unison, turned back to me.

I slowly wiped my glasses clean, walked over, and glanced at the flashing error code on the screen.

"Servo motor torque overload, causing robotic arm positioning accuracy deviation."

I calmly stated the facts.

"Avery! Didn't you debug it this morning?" David was agitated, his voice laced with accusation.

I spread my hands and pointed to the "Operator's Manual" on the wall, reading out loud, word for word: "Article 3: Equipment inspection and debugging before startup are normal work tasks and should be performed during official working hours. It's currently just past 8:30 AM, which is official working time."

My voice wasn't loud, but every word was crystal clear.

David was choked into silence, his face turning a deep, mottled red.

Of course, he knew the rules were rigid, but for the past ten years, I had "voluntarily" completed this task ahead of time.

They had grown accustomed to my effort and had come to take it for granted.

"I've got this!"

A voice cut in. Kevin Sterling pushed his way through, his face alight with eagerness to impress.

"It's just a torque parameter, right? I understand it!"

He pushed aside the operator and sat down at the control panel, furiously typing away.

Mr. Sterling, who had somehow heard the commotion and rushed over, looked approvingly at his nephew's initiative.

He shot me a scathing glare, an expression that seemed to say: See? The world still turns without you.

I hugged my travel mug, retreated to the side, and watched with cold indifference.

Kevin adjusted the torque parameter upward. The alarm stopped, but the machine's operating sound became heavier, like an asthmatic struggling to breathe.

"Done!" Kevin triumphantly stood up, seeking praise from his uncle.

Mr. Sterling nodded in satisfaction, patting his shoulder: "Excellent, Kevin. Young people need to be brave enough to take responsibility! Not like some, who draw a high salary but only know how to shirk duties!"

His words were clearly aimed at me.

I ignored him, simply watching the new products emerge on the conveyor belt.

The scratches were gone, but a faint burr appeared around the edges of the products.

An untrained eye wouldn't notice, but under the high-precision instruments of quality control, this batch of products was still scrap.

I didn't expose it.

Why should I?

In the afternoon, a core pressure sensor on the production line required annual calibration.

It was delicate work, and one of my "specialties."

When I used to do it, relying on experience and feel, I could finish it in half an hour, with precision far exceeding the standard.

Today, David approached me again, his tone noticeably more polite.

"Avery, about that sensor, you see..."

"Understood, David." I nodded, taking out a thick "Sensor Standard Calibration Procedure Manual" from the cabinet.

I opened to the first page and began the operation, step by step, strictly following the manual.

Connecting wires, checking grounding, opening calibration software, inputting initial parameters...

Every step, I performed meticulously, and agonizingly slowly.

Mark watched beside me, stomping his feet in frustration.

"Avery, you don't usually do it this way. For that zero-point drift, you could just feel the casing's temperature and get a pretty good estimate."

"Mark," I said without looking up, "The manual says to use an infrared thermometer, record three readings, and take the average. I'm just following protocol."

Mark sighed, speechless.

Two hours later, as the clock struck five and the dismissal bell rang again.

My calibration work was still missing the final step: "data solidification."

"Ms. Hayes, Ms. Hayes! Just one more minute, just one minute! Save the data before you go!" David was practically pleading.

I took off my safety glasses and powered down the equipment.

"I'm sorry, David, but it's time to clock out. The manual states that no precision instruments should be operated after working hours to prevent safety incidents."

With that, I picked up my backpack and, under the bewildered stares of everyone, once again clocked out precisely on time.

Behind me, Mr. Sterling’s voice, suppressed to its absolute limit, roared.

"Avery Hayes!!!"

I didn't look back, but a cold, sharp smile curved my lips.

Mr. Sterling, that was just the appetizer.

That evening, just as I got home, Mark’s call came through.

His voice was filled with worry.

"Avery, if you keep this up... Mr. Sterling will make your life hell. You can't fight him, he's got family connections."

"Mark," I opened the fridge and grabbed a cold soda, "He's already made my life hell. What else is there to fear?"

"But what about the production line? Our mentor's life's work, it can't be ruined like this."

The mention of my mentor made my heart ache.

I was silent for a moment, then softly said, "Mark, sometimes, to protect something, you first have to make those who want to destroy it feel the pain."

Hanging up the phone, I took a sip of soda. The icy liquid slid down my throat, but it couldn't extinguish the fire burning within me.

0

Get the NovelMaster app → search code 531243Download NovelMaster